Device Name: Haemodialysis Machine
Class of MDR：IIb
Models：W-T2008-B 

Configurations:The product is composed of circuit control system, monitoring system, blood extracorporeal circulation control system and hydraulic system, in which W-T6008S includes filter connector, replacement fluid connector, BPM and Bi-cart.
 

Intended use: 

W-T2008-B Hemodialysis Machine is used for HD dialysis treatment for adult patients with chronic renal failure in Medical Departments

See the instructions for details

Application Purpose of this Device

W-T2008-B haemodialysis machine is applicable for chronic renal failure and other blood Purification treatment.

This device should be used in medical units.

This device is specially designed, produced and sold for renal failure patients to receive haemodialysis, which is not allowed to be used for other purposes.

Forms of Therapy:

Haemodialysis, Isolated Ultrafiltration, Sequential Ultrafiltration, Hemoperfusion, etc.

Features:

　　Intelligent Double Operation System

　　LCD touch screen with button interface

　　Emergency power 30Mins (Optional)

　　Blood Pump

　　Spare Pump (for standby and also can be used for hemoperfustion).

　　Heparin Pump

　　Hydraulic compartment(Balance chamber + UF pump).

　　Operation, Alarm information Memory function.

　　A/B Ceramic proportion pump , High precision, Corrosion-proof, Accuracy.

　　Introduction

　　Size & Weight Size: 380mm×400mm×1380mm (L*W*H)

　　Area: 500*520 mm

　　Weight: 88KG

　　Power Supply AC220V, 50Hz / 60Hz, 10A

　　Input power: 1500W

　　Back-up battery: 30 minutes (optional)

　　Water input pressure: 0.15 MPa ～0.6 MPa

　　21.75 P.S.I. ～87 P.S.I.

　　Water input temperature: 10℃～30℃

　　Working environment: temperature 10ºC ～30ºC at relative humidity of no more than 70%.

　　Dialysate

　　Dialysate temperature: preset range 34.0℃～39.0℃

　　Dialysate flux: 300~800 ml/min

　　Dialysate concentration: 12.1 mS/cm ～16.0 ms/cm, ±0.1 ms/cm

　　Dialysate mixing ratio: can set variety ratio.

　　UF rate Flow range: 0 ml/h ～4000 ml/h

　　Resolution ratio: 1ml

　　Precision: ±30 ml/h

　　Extracorporeal Part

　　Venous pressure: -180 mmHg ～+600 mmHg, ±10 mmHg

　　Arterial pressure : -380 mmHg ～+400 mmHg, ±10 mmHg

　　TMP pressure : -180 mmHg ～+600 mmHg, ±20 mmHg

　　Blood pump flow range: 20 ml/min ～400 ml/min(diameter:Ф6 mm)

　　Spare pump flow range: 30 ml/min ～600 ml/min(diameter:Ф8 mm)

　　Resolution ratio: 1 ml

　　Precision: error range ±10ml or 10% of reading

　　Heparin Pump

　　Syringe size: 20, 30, 50 ml

　　Flow range: 0 ml/h ～10 ml/h

　　Resolution ratio: 0.1ml

　　Precision: ±5%

　　Sanitize

　　1.Hot decalcification 

　　Time: about 20 minutes

　　Temperature: 30~60℃, 500ml/min.

　　2.Chemical disinfection :

　　Time: about 45 minutes

　　Temperature: 30~40℃, 500ml/min.

　　3. Heat disinfection :

　　Time: about 60 minutes

　　Temperature: >85℃, 300ml/min.

　　Storage Environment Storage temperature should be between 5℃～40℃, at relative humidity of no more than 80%.

　　Monitoring System

　　Dialysate temperature: preset range 34.0℃～39.0℃, ±0.5℃

　　Blood leak detection: Photochromic

　　Alarm when erythrocyte specific volume is 0.32±0.02 or blood leak volume is equal or more than 1ml per liter of dialysate

　　Bubble detection: ultrasonic

　　Alarm when a single air bubble volume is more than 200µl at 200ml/min blood flow

　　Conductivity: acoustic-optic, ±0.5%