Technical Parameter:

1 Equipment name: Ultra-pure Water System (Model: WSL-H-100L)

2. Use: Suitable for the qualitative / quantitative analysis items of conventional experiments, such as experimental vessel washing, reagent preparation, microbiological examination and biochemical analysis.

3 Water yield: 100 L/h / set (25℃) Every 1℃ decrease in temperature is about 3% decrease

4. Water utilization rate is 60%

5 Ion interception rate> 99%, organic matter interception rate (MW> 200Dalton)> 99% bacteria and particle removal rate> 99%;

6 Running noise: 68 ± 5dB

7 Electrical conductivity of produced water quality 0.055-0.1us/cm (25℃)

8 Main technical requirements / standard performance of the equipment

8.1 Microcomputer automatic operation control, automatic liquid level protection, automatic pressure control, without special care.

8.2 Pre-treatment system adopts a three-level pre-treatment filtration system to effectively remove particles, residual chlorine and organic matter in the water, and the replacement is simple and convenient.

8.3 The reverse osmosis membrane is imported membrane, which has the advantages of high desalination rate and low operating pressure.And designed with automatic washing function, through the pulsating water flushing, can effectively prevent the film surface scaling, prolong the service life of the membrane.Using the fast plug way to connect, the replacement is simple and convenient, greatly save your time.

8.4 The equipment is equipped with high-precision conductivity, with temperature compensation characteristics, which can accurately display the water quality, and prompt the replacement information of consumables.Seismic pressure instrument, accurately display the working pressure of the equipment.L ED indicator indicates the various working conditions of the equipment to determine whether the equipment is in normal working condition.

.5The 8 ★ purification system adopts the purification column + resin tank method, which increases the filling amount, extends the pure water flow channel, ensures the efficiency of resin exchange, and greatly improves the service life

9 The equipment has dual functions, can meet both open and pressure water demand.

10 Power supply requirements: single-phase A C220V± of 10%, 50Hz; environmental requirements: adapt to the ambient temperature between + 5℃ - + 30℃, the relative humidity of 80%.

The water level sensor is made of stainless steel, with high sensitivity, and the internal micro-switch action is performed 10,000 times without fault.

12 Has the function of one-key water intake to meet a small amount of water intake demand. The button adopts L ED stainless steel button, and the function is not abnormal for 10,000 continuous action times.