Haemodialysis Machine (HD)
Category: Haemodialysis Equipment
Summary: W-T2008-B haemodialysis machine is designed for performing chronic hemodialysis for adult patients with End-Stage Renal Disease (also known as Chronic Kidney Disease Stage 5).
Product Details
Device Name: Haemodialysis Machine
Class of MDR：IIb
Models：W-T2008-B
Configurations:It is composed of circuit control system,monitoring system,blood extracorporeal circulation control system and hydraulic system,but does not include disposable parts.
Intended use:
The Haemodialysis Machine is designed for performing chronic hemodialysis for adult patients with End-Stage Renal Disease (also known as Chronic Kidney Disease Stage 5).
See the instructions for details
Application Purpose of this Device
W-T2008-B haemodialysis machine is is designed for performing chronic hemodialysis for adult patients with End-Stage Renal Disease (also known as Chronic Kidney Disease Stage 5).
Environment of use：It can be used in limited care centers and clinical hemodialysis.
Forms of Therapy:
Haemodialysis, Isolated Ultrafiltration, Sequential Ultrafiltration, etc.
Features:
Intelligent Double Operation System
LCD touch screen with button interface
Emergency power 30Mins
Blood Pump
Spare Pump (for standby )
Heparin Pump
Hydraulic compartment(Balance chamber + UF pump).
Operation, Alarm information Memory function.
A/B Ceramic proportion pump , High precision, Corrosion-proof, Accuracy.
Introduction
Size & Weight Size: 750mm×620mm×1570mm (L*W*H)
Area: 630*720 mm
Weight: About 88KG
Power Supply 220~240VAC, 50Hz / 60Hz, 16A
Input power: 2000VA
Back-up battery: 30 minutes
Water input pressure: 0.15 MPa ～0.6 MPa
21.75 P.S.I. ～87 P.S.I.
Water input temperature:5℃～35℃
Working environment:Ambient temperature 5ºC～32℃,relative humidty:30%~80%.
Dialysate
Dialysate temperature: preset range 35.0℃～39.0℃
Dialysate flux: 300、500、800 ml/min
Dialysate concentration: 12.8 mS/cm ～15.7 ms/cm, ±0.1 ms/cm
UF rate Flow range: 0 ml/h ～4000 ml/h
Resolution ratio: 1ml
Precision: ±1%
Extracorporeal Part
Venous pressure: -60 mmHg ～+520 mmHg, ±10 mmHg
Arterial pressure : -300 mmHg ～+280 mmHg, ±10 mmHg
TMP pressure : -60 mmHg ～+520 mmHg, ±20 mmHg
Blood pump flow range: 15 ml/min ～400 ml/min(diameter:Ф6 mm)
Spare pump flow range: 15ml/min ～600 ml/min(diameter:Ф8 mm)
Resolution ratio: 1 ml
Precision: error range：± 10%
Heparin Pump
Syringe size: 20, 30, 50 ml
Flow range: 0.1 ml/h ～10 ml/h
Resolution ratio: 0.1ml
Precision: ±5%
Disinfection
Citric acid thermal disinfection:
Time: about 45 minutes
Temperature: ≥85℃
Monitoring System
Dialysate temperature: preset range 35.0℃～39.0℃, ±0.5℃
Blood leak detection: Photochromic
Under the maximum specified dialysate flow rate, ultrafiltration flow rate, the maximum alarm limit of the leakage rate is ≤0.5mL/min (the HCT of blood is 25%), when blood leakage is detected.
Bubble detection: ultrasonic
The alarm will operate when single volume of bubble is bigger than 50 ul at blood flow of 200ml/min. The alarm limit for continuous microbubble passage in the venous circuit is 1 ml/min.
Conductivity: acoustic-optic
Keywords: Haemodialysis Machine (HD)
Previous page
Next page
RECOMMENDED PRODUCTS
Products
Laboratory Integrated Sewage Treatment System
Central Dialysate Delivery System
PRODUCT FEEDBACK
Product Message
Chengdu Wesley Biotech Co., Ltd
Address：Block B6 Tianfu Life Science Park, No.88 Keyuan South Road, High-Tech Zone, Chengdu, P.R. China
Fax：0086-28-8512 2229
Contact Person：Ms. Emily
Mobile：0086-15328015987
Email：chinacd@wlsmed.com
Copyright © 2026 Chengdu Wesley Biotech Co., Ltd. All rights reserved.